Battery Charging - Youin Amsterdam BK1000 Manual De Instrucciones

Operation Instruction
Parking attention
1, Shut off the power switch after you get off. In order to prevent accidents caused by
inadvertantly by turning accelerator and starting up the bicycle abruptly.
2. Do not start-up bicycle frequently while stationary, to ensure the service life of battery,
motor and electric switch.
3. Shut off the power after parking, and remove the key.

Battery charging

When the ride is over or the battery is running out, charge battery immediately.
Charging methods can be divided into two kinds:
One is to take out the battery then charge, the other is to charge the battery on e-bikes.
Connect the charger plug to the battery charging port and the AC.
Connect to a 100-220V/50-60Hz power source (depending on your region).
There is an LED indicator on the battery charger unit.
The LED is red when the power is connected and the battery
is charging.
When the LED turns green, the battery is fully charged.
SLA (sealed lead acid) recommended charging time:6-8hours
Li-LON recommended charging time:5-6 hours
*Do not charge continuously for more than 18 hours.*
After charging, unplug the input plug first (from the outlet),
then unplug the output connector (from the bike). The battery
charger must have constant voltage. Fluctuating voltage or
fluctuating power supply of any kind may damage the battery
storage cells.
ENGLISH 9