Braun 7 Serie Manual De Instrucciones página 21

CLEAN&RENEW STATION
Shaving system
is still wet
after cleaning
Program
has been
completed.
Cleaning does
not start when
pressing the
start button.
Increased
consumption of
cleaning fluid.
Guarantee
We grant a 2 year guarantee on the product commencing on the date of
purchase. Within the guarantee period we will eliminate any defects in the
appliance resulting from faults in materials or workmanship, free of charge
either by repairing or replacing the complete appliance at our discretion.
This guarantee extends to every country where this appliance is supplied by
Braun or its appointed distributor.
This guarantee does not cover: damage due to improper use, normal wear and
tear (e.g. shaver foil or cutter block) as well as defects that have a negligible
effect on the value or operation of the appliance. The guarantee becomes void
if repairs are undertaken by unauthorised persons and if original Braun parts
are not used.
To obtain service within the guarantee period, hand in or send the complete
appliance with your sales receipt to an authorised Braun Customer Service
Centre (address information available online at www.service.braun.com).
For UK only:
This guarantee in no way affects your rights under statutory law.
1. Drain of the
Clean&Renew station
is clogged.
2. Cleaning cartridge
has been used for
quite a while.
1. Shaver is not placed
properly in the
Clean&Renew station.
2. Cleaning cartridge
contains not enough
cleaning fluid (display
lights red).
3. Appliance is in
stand-by mode.
Drain of the
Clean&Renew station
is clogged.
1. Clean the drain with a wooden
toothpick. Regularly wipe the
tub clean.
2. The ethanol proportion has
decreased while the oil
proportion has increased.
Remove residue with a cloth.
1. Insert shaver into the
Clean&Renew station (contacts
of the shaver need to align with
contacts in the station).
2. Insert new cleaning cartridge.
3. Press start button again.
– Clean the drain with a wooden
toothpick.
– Regularly wipe the tub clean.
21