Task 6: Setting Up The Smartstor - Promise Technology SMARTSTOR NS4600 Guia De Inicio Rapido

Task 6: Setting up the SmartStor

The SmartNAVI performs the setup procedures on your SmartStor. After the
procedure is done, you will have a default folder on the SmartStor, set up as a
network drive on your PC.
You can change the network settings, create RAID volumes, add and mount
folders on your SmartStor after initial setup using SmartNAVI. You can also made
more advanced settings using the PASM software. See "Task 7: Connecting to
PASM" on page 12.
To set up your SmartStor:
1. Double-click the SmartNAVI icon in the Windows
application tray or Macintosh Dock (right).
The MSN Window opens.
2. Double-click the NS4600 in the NAS list.
The Login dialog box appears.
3. Type admin in the Username, Password, and
Confirm fields, then click the Login button.
This action creates a default user and logs the default
user into SmartNAVI.
The Main Window opens.
4. Choose a Setup Mode and click the button:
• One Click Setup – Loads a collection of default settings.
Recommended for most users.
• Advanced Setup – Enables you to make your own settings.
Recommended for advanced users.
5. Click the OK button to continue.
If you chose One Click Setup, the Wizard creates a RAID Volume and a set
of default folders.
The PUBLIC folder on the RAID Volume appears under My Computer as a
network drive. See page 11, Figure 4.
You are finished with the setup.
If you chose Advanced Setup, continue under "Advanced Setup" on
page 10.
Task 6: Setting up the SmartStor
9
SmartNAVI in
Windows
SmartNAVI in
Mac OS X