USING DETERGENT
Add detergent to the container. Set the Adjustable Spray Wand at low pressure position. (fig 6)
Fig 7
Insert power card hold into the machine. (fig 7)
Insert gunstock into the machine. (fig 8) Insert handle
into the machine. (fig 9)
The Electric Pressure Washer is supplied with a rotary brush and a fixed brush. Both have soft
bristles and can be used in conjunction with the detergent dispenser to apply detergent to the
surface you are cleaning. These are ideal for cleaning car bodywork, windows etc. This is a low
pressure setting. The brushes connect to the lance extension. There is an adapter with each
brush; you must fit it before connecting to the lance extension.
Note:
Do not fit brushes when the power is on.
Note:
The brushes cannot be fitted into the trigger gun and must be used in conjunction with
the lance extension.
The machine should be stored in a frost-free environment.
After long-term storage without operation, it is possible to form scales inside the machine making
it hard to start again. In such conditions it is recommended to turn off and disconnect the power
supply and rotate the motor by hand several times so as to avoid excessive current draw on
the motor and the power supply.
Fig 8
LONG TERM STORAGE
8
-
Fig 9