Maintenance / Care; Environmental Instructions - Würth 5714 376 Serie Manual De Instrucciones

Operation
▸
Push a suitable tool/bit (Würth system accessory)
on to the tool holder [1].
▸
Check that the tool bit is correctly seated.
▸
Set the direction of rotation and torque at the
switch [5].
Symbol Meaning
Anticlockwise rotation
Clockwise rotation
Small torque
Medium torque
Large torque
▸
Hold the device by the handle [4] and auxiliary
handle [2].
▸
Switching on: Press switch [3].
▸
Switching off: Release switch [3].

Maintenance / Care

Risk of injury or material damage.
Clean and service the device only
¾
when it is disconnected from the
compressed air supply.
▸
Keep the casing and handle dry, clean and free
from oil. Never use brake fluid, petrol or solvent
for cleaning.
▸
Check screws for tight fitting.
Warranty
We provide a warranty for this Würth device from
the date of purchase and in accordance with the
legal/country-specific regulations (proof of purchase
through invoice or delivery note). Any damage will
be remedied by a substitute delivery or by repair.
Damage caused by improper handling is not
covered by the warranty. Claims under warranty
can only be accepted if the device is returned fully
assembled to a Würth agency, your Würth sales
representative or an authorised Würth customer
service workshop. We reserve the right to make
technical changes.
We accept no liability for printing errors.
CAUTION!

Environmental instructions

Do not throw the device away with
normal household waste. Dispose of
the device via an approved waste
disposal company or via your local
authority waste disposal facility.
Observe the currently valid regula-
tions. In case of doubt, contact your
waste disposal facility. Dispose of all packaging in
an environmentally sound manner.
Accessories and spare parts
If in spite of careful manufacturing and testing
processes, the device becomes faulty, a repair by
Würth masterService should be arranged. Always
quote the article number as given on the device
name plate in any enquiries or spare parts orders.
The latest spare parts list for the device is available
online at http://www.wuerth.com/partsmanager.
Alternatively, contact your local Würth agency for a
hardcopy.
EC Declaration of Conformity
We herewith declare that this product conforms to
the following standards and directives:
Standards
ISO 12100:2010 / ISO 11148-6:2012
ISO 15744:2002 / ISO 28927-2:2009
in accordance with the regulations stipulated in the
directives:
EC Directive
• 2006/42/EC
Technical documentation with:
Adolf Würth GmbH & Co. KG, Abt. PCM
Reinhold-Würth-Straße 12 – 17,
74653 Künzelsau, Germany
M. Strobel
Head of
Product Management
Künzelsau: 27.04.2015
Dr.-Ing. S. Beichter
Head of Quality,
Authorised Signatory
17