Publicidad
Idiomas disponibles
Idiomas disponibles
The attached storm tensioning in the scope of delivery provides only limited protection. Strong wind or storm damage is
excluded from warranty or guarantee claims.
Dismantling
Dismantling is carried out in the reverse order of assembly.
Packing and storing
Pack the components of the pool cover in a dry and clean condition to avoid the creation of mould. Allow the parts to dry
thoroughly if they have become wet during use.
Store the parts of the pool cover at a dry place. The fabric, the rods and zipper may be attacked by mould or corrosion
if stored in a wet condition.
When you are working with rods in general: When joining the components of the rods, take care that your fingers will not
be caught in them.
Fibre glass rods: The individual rods are under tension when you insert them into the second metal eye. Take care
that they do not spring out of your hand you might get hurt.
Erection rods: One of the ends of the erection rods is pointed. Take care that you do not hurt your eyes.
UV Light: Please note that colour differences may arise due to exposure to sunshine (UV light). The product is only
suitable for use during the swimming season, and should be dismantled and stored appropriately afterwards.
Publicidad
