GIB_GIBE - Titel.book Seite 8 Dienstag, 25. Juli 2006 2:13 14
EN
Symbols, abbreviations and terms
used.
The symbols used in this Instruction Manual and
where necessary on the machine, serve to draw
your attention to possible hazards when work-
ing with this machine.
Symbol
Term, meaning
Action
Read documentation
General mandatory sign
Danger warning
Screw
Screw, metric
Anchor
European conformity symbol
For your safety.
Do not use this undercarriage before you
have thoroughly read and completely
understood this Instruction Manual, including
the figures, specifications and safety regulations.
Read and observe the Instruction Manual
of the machine which is to be mounted on
this undercarriage.
Please also observe the relevant national indus-
trial safety regulations (e.g. in Germany: BGV
A2, BGR 500).
Non-observance of the safety instructions can
lead to an electric shock, fire and/or severe inju-
ries.
This Instruction Manual should be kept for later
use and enclosed with the machine, should it be
passed on or sold.
8
Make sure that the undercarriage stands securely
and has a level setup position. Fasten the under-
carriage to the ground. If the undercarriage tips
over during operation, serious injuries can
result.
Use appropriate fastening material when mount-
ing the machine to the undercarriage. When
mounted incorrectly, the machine can come
loose from the undercarriage and cause serious
accidents.
Before switching on, ensure that all clamping
levers on the undercarriage are firmly tightened.
Sudden lowering of the machine during the
work procedure can lead to serious injuries.
The mains plug of the extraction system may be
mounted only by a qualified electrician. The pro-
tective conductor in the mains socket outlet
must be connected with the protective earthing
of the mains supply.
Pull out the mains plug for maintenance and
repair! Switching on the extraction system unin-
tentionally can lead to an electric shock.
Have the electrical safety of the extraction system
checked regularly in accordance with statutory
regulations. For systems that have not been
checked, there may be danger of electrical
shock!
At a glance.
1 Belt tension lever
2 Support
3 Fastening screws
4 Motor
5 Hose clamp
6 Extraction hose
7 Frame
8 Filter insert (fine filter)
9 Filter insert (coarse filter)
10 Collection receptacle
11 Locking screws
12 Star-knob bolts for collection receptacle
13 Connection sleeve
GIB/GIBE