Leica DIGICAT 500i Manual Del Usuario página 7

Danger
Danger
Danger
Danger
DIGICAT 500i/550i, Safety Directions
The Locator may fail to detect electrical services in Power mode if an incorrect power setting
is used.
Precautions:
Before use, verify the Locator is setup to be compatible with mains frequency supply in your
country. Options are 50 or 60 Hz. Refer to "Appendix B World Frequency Zones"
(User Manual) for more information.
Contact your agency or Leica Geosystems authorised service workshop if your unit is incor-
rectly configured for your region.
Only with Transmitter:
A hazardous signal may be present on the connection plug of the Signal Clamp when clipped
over a live service.
Precautions:
The clamp should be connected to the Transmitter before clamping around a live service.
Connecting the Transmitter's cable set to a live service can result in receiving an electric
shock.
Precautions:
The Transmitter's cable set should never be connected directly to an electrical live service.
When using a signal clamp, a hazardous signal may be present on the service causing
personal harm.
Precautions:
Do not use on electrical services which have impaired, or no insulation. If in doubt do not
use.
EN
6