Credenza 419977 Instrucciones De Montaje página 15

Step 11
Fasten eight METAL BRACKETS (4G) to the TOP (G). Use
å
eight BLACK 9/16" LARGE HEAD SCREWS (1S).
Fasten the TOP MOLDINGS (P and Q) to the TOP (G). Use
å
eight BLACK 9/16" LARGE HEAD SCREWS (1S) through
the METAL BRACKETS and into the MOLDINGS.
NOTE: Fasten the MOLDINGS (P) fi rst. The MOLDINGS (Q)
å
will rest against the MOLDINGS (P).
NOTE: There are no pre-drilled holes in the MOLDINGS.
å
The SCREWS will tighten into the grooves.
NOTE: The grooves in the MOLDINGS will be
å
closer to the TOP (G).
NOTE: If there are any gaps around the MOLDINGS,
å
loosen the bracket screws in the TOP, make
adjustments, and retighten the screws.
4G
www.sauder.com/services
P
G
Q
BLACK 9/16" LARGE HEAD SCREW
P
4G
419977
1S
(16 used in this step)
4G
Q
The groove is
closer to this edge.
Page 15