Step 19
Push the RUBBER SLEEVES (2R) over the METAL PINS (1R). Insert the METAL PINS into the hole locations of your choice
å
in the ENDS (A, B, C, and D) and UPRIGHTS (E and F). Set the ADJUSTABLE SHELVES (L) onto the METAL PINS.
To insert the drawer into your unit, tip the front of the drawer down and drop the rollers on the drawer behind the rollers on
å
the unit. Lift the front of the drawer up and slide it into the unit.
Push a CAM COVER (13P) onto each visible HIDDEN CAM.
å
Apply the WARNING LABEL (3L) to the TOP (G). You should be able to read the label when the TV is removed from the
å
unit. When the TV is in place, it should hide the label. Peel off the backing and apply the label as shown in the diagram.
NOTE: This is a permanent label intended to last for the life of the product. Once applied, do not try to remove it.
å
To cover HIDDEN CAMS
(10 used)
13P
B
1R
(8 used)
www.sauder.com/services
L
30 lbs.
D
2R
F
3L
95 lbs.
G
E
L
30 lbs.
35 lbs. total
15 lbs. each
419977
WARNING
Never use this furniture with a TV that is too
large or too heavy. Severe injury or death can
occur. The TV and furniture will be unstable
and may tip.
- The TV must weigh less than 95 lbs.
- The base of the TV must be able to sit
completely on this shelf.
A
C
Page 23