Special Instructions; For Future Reference - Brentwood Appliances BLEND-TO-GO JB-191 Instrucciones De Operación Y Seguridad

• Do not let cord hang over edge of table or counter where it may be tripped over or
pulled. Do not allow cord to touch hot surfaces.
• Do not operate the product if it has a damaged or cut Power Cord or plug, if wires
are exposed, if it malfunctions, if it is dropped or damaged, or if the Motor Housing
is dropped in or exposed to water.
• This product has no user-serviceable parts.
• Do not attempt to examine or repair this product yourself. Only qualified service
personnel should perform any servicing; take the product to the appliance repair
shop of your choice for inspection and repair.
• Do not put any stress on the power cord where it connects to the product, as the
power cord could fray and break.

SPECIAL INSTRUCTIONS:

• Keep hands and utensils out of container while blending to reduce the risk of severe
injury to the blender or a personal injury. A scraper may be used but only when
blender is not running.
• Blades are very sharp. Handle Carefully.
• To reduce the risk of injury, never place cutter assembly blades on base without jar
properly attached and with cover in place.
• A short power supply cord is provided to reduce the risk of becoming entangled in
or tripping over a longer cord. An extension cord is not recommended for use with
this product, but if one must be used:

The marked electrical rating must be at least as great as that of the product;

If the product is of a 3-prong grounding type, the extension cord must be a
grounding-type 3-wire cord.

Arrange the extension cord so that it will not drape over the countertop or
tabletop where it can be tripped over or pulled.
WARNING: This product is equipped with a polarized plug (one blade
is wider than the other blade) to reduce the risk of electrical shock.
This is a safety feature. The plug will fit into a polarized outlet only one
way. If you are unable to insert the plug into the electrical outlet, try
reversing the plug. If the plug still does not fit, contact a qualified electrician. Never
use the plug with an extension cord unless you can fully insert the plug into the
extension cord. Do not alter the plug. Do not attempt to defeat the safety purpose of
the polarized plug.
SAVE THESE INSTRUCTIONS

FOR FUTURE REFERENCE

3