Basic Cleaning - Medion Easy Home MD19143 Manual Del Usuario

Operation

Basic cleaning

1. Remove the packaging material.
2. Clean all parts of the product before first use as described in the chapter
"Cleaning".
Operation
NOTICE!
Risk of damage!
Improper handling of the product may result in damage to the
product.
− Always switch the product off and unplug the product
when filling water into the water tank or emptying water
from the water tank.
− Do not operate the product when the water tank is empty.
− Do not overfill the water tank. See chapter "Technical
information" for the maximum capacity.
− Do not move or remove the mist nozzle while the product is
turned on to prevent splashing or spilling.
− Do not fill the water tank with water above 113 °F (45 °C).
− Allow the product to cool for one hour after prolonged use
(3–6 hours) to avoid damaging the vibration generator.
− Only use 100 % pure and natural essential oil suitable
for diffusion. Consult the label on the essential oil for
appropriate usage directions.
− Only add the essential oil on the aroma tray with aroma
pad on the base unit. Never add it into the water tank.
− Drain the water and disconnect the product after each use.
12