mixars Primo Manual Del Usuario página 42

Specifications
1. GENERAL SECTION
PRODUCT
POWER SOURCE
POWER SUPPLY
DIMENSIONS
WEIGHT
2. STANDARD TEST CONDITION:
 Ambient Temperature
 Relative Humidity
NOTE: Measurements can be carried out between 5 degC to 35 degC and 45% to
85% relative humidity.
3. Audio Characteristics (Unbalance Output Load = 100K ohm, Balance
Output Load = 600 ohm
Phones = 33 ohm, EQ/Filter Flat, Mic Echo at Min, Fader At Max. Unless
Otherwise Noted)
4. INPUT/OUTPUT IMPEDANCE & SENSITIVITY: (1KHz INPUT, MIC/AUX,
TRIM, MASTER AT MAX.)
4-1. INPUT IMPEDANCE AND REFERENCE INPUT LEVEL:
LINE：
PHONO：
AUX：
MIC：
USB：
4-2. OUTPUT IMPEDANCE AND REFERENCE OUT LEVEL:
MASTER：
BALANCED：
BOOTH：
PHONES：
5. FREQUENCY RESPONSE: (REFERENCE INPUT LEVEL, MIC/AUX, TRIM AT
MAX. MASTER AT 12 O'CLOCK.)
LINE：
AUX：
PHONO：
MIC：
6. MAXIMUM INPUT: (MIC/AUX, TRIM, MASTER AT 9 O'CLOCK. ADJUST
INPUT 1KHz LEVEL TO OUTPUT LEVEL LESS THAN 1% T.H.D WITH A-
w/20KHz LPF)
LINE：
PHONO：
MIC：
PROFESSIONAL 2CH CONTROLLER FOR SERATO
WITH 4-DECK CONTROL
- DC ADAPTOR AC 100V – 240V 50/60Hz
- USB POWERED
- DC ADAPTOR: DC IN 5V2A
- USB POWER: USB PORT WITH CURRENT SUPPLY
>1A
508.4mm (W) X 330.7mm (D) X 65.6 mm (H)
4.2kg
23 +/- 2 degC
65% +/- 5%
10K OHM /-14dBV(200mV)
47K OHM /-50dBV(3.16mV)
10K OHM /-14dBV(200mV)
5K OHM /-54dBV(1.99mV) (Unbalance)
90 OHM /-23.4dBFS Non Serato Mode
1K OHM /0dBV (1V)
600 OHM /0dBV (1V)
600 OHM /0dBV (1V)
33 OHM / 0dBV (1V)
20 - 20K Hz
20 - 20K Hz
20 - 20K Hz
20 - 20K Hz
Nomina Limited
+10dBV +8dBV
-25dBV -28dBV
-20dBV -23dBV
41
Nominal Limited
± 1dB ± 2dB
± 1dB ± 2dB
± 1dB ± 2dB
± 1dB ± 2dB
Nominal Limited
+1/-1.5dB +2/-3dB
+1/-1.5dB +2/-3dB
+1/-2dB +2/-3dB (RIAA)
+1/-2dB +2/-3dB