Lenco L-92 Manual De Usuario página 9

INSTALL THE COUNTERWEIGHT
-
SLIDE COUNTERWEIGHT ONTO THE TONEARM. TWIST IT LIGHTLY AND IT WILL SCREW INWARDS ONTO THE REAR
END OF THE TONEARM. EVERY FULL TURN OF THE SCALE RING REPRESENTS AROUND 2.4 GRAM (+/-0.4 GRAM).
-
FOR THE DEFAULT AUDIO-TECHNICA AT-3600L CARTRIDGE, TURN THE COUNTERWEIGHT INWARDS UP TO THE
HORIZONTAL LINE ON THE REAR END OF THE TONEARM.
-
HOLD THE COUNTER WEIGHT WITH ONE HAND, TURN SCALE RING TO "3" AGAINST THE INDEX LINE ON THE
SHAFT YOUR ANOTHER HAND AND MAKE SURE NOT TO TURN THE COUNTER WEIGHT, ONLY TURN THE SCALE
RING! THE TRACKING FORCE WILL BE AROUND 3.0 GRAM (+/-0.4 GRAM).
-
IF NECESSARY, TURNING THE COUNTER WEIGHT INWARDS INCREASES THE TRACKING FORCE, WHILE TURNING
THE COUNTER WEIGHT BACKWARDS DECREASES THE TRACKING FORCE.
-
FOR OTHER CARTRIDGES, YOU CAN ADJUST THE TRACKING FORCE BY TURNING COUNTERWEIGHT INWARDS OR
BACKWARDS. EACH NUMBER ON THE SCALE RING CORRESPONDS TO AROUND 0.4GRAM OF TRACKING FORCE.
9