Publicidad
Idiomas disponibles
Idiomas disponibles
Step 5 (optional): Installation of the Bell ME wireless
chime
The Bell ME wireless chime is sold separately. It is
possible to connect multiple wireless gongs to the Buzz
LO video doorbell, for example, for use in different
rooms.
1. Insert 3 AA batteries into the Bell ME, or power the
Bell ME through the micro-USB.
2. Short press the
button on the Bell ME to put it
into pairing mode. A red light will flash to confirm.
3. Briefly press the button of the (already installed) Buzz
LO once. A melody will be played to confirm.
4. Now use the
button to set the desired volume.
5. The
button allows you to select a different
melody.
Follow the above steps again to connect an additional
Bell ME wireless chime (sold separately).
Step 6: Setting the chime type
In the Buzz LO menu you can select which chime type
you want to use. Open the Smart me app > select the
Buzz LO > select settings (pen in top right) > select 'Bell
settings'
• Existing doorbell - ON: notification via Smart me app,
the existing doorbell and (if connected) via wireless
doorbell (Bell ME).
• Existing doorbell - OFF: notification via Smart me app
and (if connected) via wireless doorbell (Bell ME)
Notes regarding the use of the product
• Once the installation is complete, you can operate
and configure the video doorbell using the app.
• Please visit our website www.marmitek.com for more
information and how to use the Smart me products.
Technical specifications
Declaration of Conformity
Hereby, Marmitek BV, declares that the Buzz LO and Bell ME are in compliance with the essential
requirements of the 2014/53/EU Directives. Full Declaration of Conformity is available at
www.marmitek.com/en/declarations-of-conformity/
More detailed user guide and instructions are available on our website at
Buzz LO
and Bell ME
TM
TM
Buzz LO
Video resolution
Detection angle
Compression
Bandwidth
Night vision
Audio
IP code
SD card
Wireless technology
Power supply
Standby consumption
Operating temperature
Dimensions
Bell ME (available separately)
Wireless technology
Maximum range
Volume level
Power supply
Dimensions
www.marmitek.com
1080p
145°
H.264
32 kbit/s ~ 2 Mbit/s
Infrared range up to 5 m
2-way communication
IP54 (water resistant)
Up to 128 GB, not included
Wi-Fi 2.4 GHz and RF 433
MHz
8 ~ 16 VAC 50/60 Hz,
adapter not included
< 0,5 Watt
-20° tot 50°C
115 x 45 x 28 mm
RF 433 MHz
Up to 80 m LOS (line of
sight)
Adjustable in 4 steps
3x AA batteries (not
included) or micro USB
(cable not included)
75 x 75 x 30 mm
5
Publicidad
