Kuppersbusch KI6750.OSR Instrucciones De Uso página 42

EN
After the food is boiled, enable the
plate by selecting it, and press the
CHEF sensor (16) until the led
(19) located on the icon
up. Once the function is activated, the
symbol will appear on the power
indicator (3).
You can override the function at
any time by turning off the plate,
by changing the power level or by
choosing a different special function.
Q U I C K B O I L I N G F U N C T I O N
(depending on the model)
This function enables the automatic
boiling control, which is a great help
for cooking pasta, rice, eggs, boil some
food, etc. It is available only in zones
where the symbol appears.
Conditions of the container
For a proper operation of the Quick
Boiling function, you need to use a
container that meets the following
preconditions:
- Bottom size as close as possible to
the diameter of the plate.
-WITHOUT CAP.
- Filled to over half its capacity at
room temperature water (never
use warmed or hot water).
Failure to comply with these conditions
will distort the proper control of boiling.
WARNING: do not use this
feature for a different cooking
purpose other than boiling water.
Never use oil, it may lead to
overheat and generate a flame.
Activation of the function
To activate the function, select the
plate, and press the CHEF sensor
Fig. 6
42
(16) until the led (20) located on the
icon lights up.
lights Once the feature is activated, on the
power indicator (3) ; a moving segment
will appear, indicating that the cooking
is under system's control.
When the system detects that it is
about to start boiling, a first beep will
be heard. Take this opportunity to
prepare your food for boiling or baking
as desired.
After 30 seconds, a second beep will
be heard; if you have not already done
so, it's time to pour the food in the pan.
After the second beep, the system
will activate the timer and stopwatch
for you so that you can control how
long the food is to be boiled and the
symbol will appear on the power
indicator (3).
30 seconds after activating the
stopwatch, a third beep will sound
to warn that from that moment on,
the system will decrease the power
Fig. 5
supplied in order to maintain a gentle
and continuous boil. The timer will
remain active until the end of cooking.
If desired, you can disable the timer
and set a time for the countdown and
automatic shutdown of the plate (see
section Timer Function).
Deactivation of the function
You can override the function at
any time by turning off the plate,
by changing the power level or by
choosing a different special function.
GRILLING FUNCTION
This function sets an automatic power
control suitable for cooking on the grill.
To activate it, select the plate, and
press on the CHEF sensor
until the led (21) located on the icon
lights up. Once the function is
activated, on the power indicator (3) a
moving segment will appear indicating
that the cooking is in the preheating
(16) ,