Technical Specifications; Warranty Conditions - Sinvest VGE Blue lagoon PROFIHEATER Manual Del Usuario

temperature. Once the set temperature is reached, the light will go out. Always check the temperature
EN
reached, before entering the pool.

TECHNICAL SPECIFICATIONS

Max. flow rate
Max. pressure
Max. chlorine
pH-value
Alkalinity
Calcium hardness
Connection
Voltage
Capacity
Item number: E830010 Profiheater 3kW

WARRANTY CONDITIONS

You made an excellent decision when you chose this product. The device has been carefully assembled in
compliance with all applicable safety regulations. To achieve the desired quality, the supplier has only used
high quality materials. The supplier guarantees the product against defects in materials and workmanship
for two years from the date of purchase. Warranty claims can only be processed if the product is sent back
postage paid and are accompanied by a valid proof of purchase. Warranty repairs may only be carried out
by the supplier.
Warranty claims that are the result of incorrect installation or operation will not be honoured. Defects
caused by poor maintenance are also excluded from warranty coverage. The supplier is not in any
way responsible for damage caused by misuse of the product. The supplier cannot be held liable for
consequential damage due to failure of the device. Claims related to transport damage will only be
accepted if the damage was established or confirmed upon delivery by the carrier or postal service. Only
then is it possible to submit a claim to the carrier or postal service.
6 | BLUE LAGOON FPROFIHEATER 3KW MANUAL
10,000 L/h
2 bar
1 mg/L
7.2 – 7.8
60 – 120 mg/L (ppm)
200 – 1000 mg/L (ppm)
Ø63-50-40-32-25 mm
230V AC 50Hz-60Hz
3Kw