Anker PowerConf S500 Manual Del Usuario página 6

Using Your PowerConf
Press and hold for 3 seconds
Press (when powered on)
Press
Press
Press and hold for 2 seconds
Press or press and hold
Press
Press
Press twice
Press and hold for 2 seconds
Press
LED Light Bar
Lights up then turns off
Lights up green (Battery level >10%)
Lights up red then flashes (Battery level <10%)
Flashes blue
Lights up cyan (Standard mode)
Lights up yellow (AI noise cancelling mode)
Lights up purple (Broadcasting mode)
Lights up blue then turns off
Turns red
Lights up purple
Power on or off
Check the battery level
Enter Bluetooth pairing mode or disconnect
Bluetooth
Answer/End a call
Reject a call
Volume up/down
Mute or restore the microphone
Play/Pause/Resume music
Skip to next track
Activate Siri or other voice assistant software
Link with another PowerConf S500
Powered on
Check the battery level
Incoming call
Sound direction detected
Adjust volume
Muted
Enter linking mode
EN 04