Thuraya XT-PRO DUAL Manual Del Usuario página 16

Getting started
Tracking by Area (Geofence)
● Coordinates will be sent if the user moves out of a predesignated
geofence. Choose the number of points to create the geofence (3
points to 7 points).
● Enter the coordinates in consecutive order to form a closed polygon.
Geofence
For example, you have chosen to set up a geofence with 7 coordinates to
form the polygon on the right side and have activated Tracking by Area. If
you are inside the Geofence, e.g. moving along the
coordinates will be sent. However, if you are outside the Geofence, e.g.
moving along the green line, your coordinates will be sent as outgoing
messages every 3 minutes, until you reach back inside the Geofence or
deactivate Tracking.
12
User Guide English
 
blue line, no
P2
N3.48647
P1
E72.80644
N3.48659
E72.79666
P7
N3.48505
E72.79313
P6
N3.48188
E72.79385
P5
N3.48158
E72.80048
Moving along the blue line - No Tracking
Moving along the green line - Tracking
Note
How to activate and deactivate tracking once it is set up:
• To activate, press the Tracking button or go to
Start tracking
> (the Tracking icon will then start blinking in the status bar).
• To deactivate while in use, short press the right soft key from the home screen
Menu Tracking Options
or go to > >
N3.48000
E72.80700
P3
N3.48348
E72.81031
P4
N3.47926
E72.80639
Menu Tracking Options
> >
Stop tracking.
>
XT-PRO DUAL