Thuraya XT-PRO DUAL Manual Del Usuario página 19

Using your Thuraya XT-PRO DUAL
Data services via the XT-PRO DUAL
Use data services by setting up your XT-PRO DUAL as a data modem. For
satellite data, choose either GmPRS (up to 60/15 kbps download/upload)
or Circuit Switched Data (9.6 kbps) and choose 2G/3G data for GSM data:
Download the latest Thuraya XT-PRO DUAL software package (this can be
found on the included CD or on the Thuraya website), which contains the
required driver for connecting your XT-PRO DUAL to a PC or laptop to use
data in satellite or GSM mode.
Step 1
Run the setup file - the software package including the USB driver will be
installed.
Step 2
Connect your Thuraya XT-PRO DUAL with the PC/laptop and set the
phone up as a data modem. Connect via the included USB data cable for
satellite data or use a micro USB data cable for GSM (2G/3G) data.
Step 3
Create a dial-up connection and in the dial-up phone number field, enter the
access number *99# for GmPRS/2G/3G or 1722 for Circuit Switched Data.
For detailed instructions on step 2 and 3 please refer to the 'Connect your
XT-PRO DUAL' manual on the CD or on the Thuraya website.
XT-PRO DUAL
Access Point Name (APN)
GmPRS settings
There are 3 Thuraya APNs available, to change the default setting, go to
Menu Settings Data settings
> >
● GET (default, no compression)
● GETLC (low compression, images will be compressed)
● GETHC (high compression, images will not be downloaded)
GETLC and GETHC are designed to compress all http traffic that is routed
through them. Any emails and apps that do not use http will be delivered
uncompressed.
GSM (2G/3G) settings
Go to Menu > Settings > Data settings
APN obtained from your GSM service provider.
GmPRS settings:
>
> 2G/3G settings and enter the
User Guide English

15
