Configuration - Air Live ES-6000 Guia De Inicio Rapido

Port1: Use this port to connect to internal network
Port2: HA
Console Port: 9-pin serial port connector for checking setting and restore to the factory setting.
AC Power: Input voltages ranging from 100 ~ 240 VAC, and with a maximum power output of 85 watts.

Configuration

STEP 1:
1. Connect the Admin's PC and the port1 of the Security Gateway.
2. Open an Internet web browser and type the default IP address of the Security Gateway as 192.168.1.1 in the
address bar.
3. A pop-up screen will appear and prompt for a username and password. Enter the default login username
(admin) and password (airlive) of Administrator.
STEP 2:
1. If user is the first time to login the Security Gateway management interface, system will automatically switch to
Install Wizard page, and guide user to configure the settings.
2. Please check manual on CD for more detail configuration.
English
4
ES-6000