Inserting The Battery - Panasonic TY-TP10U Instrucciones De Operación

Inserting the battery

When the battery level is low, the indicator lamp blinks 5 times
when the Touch Pen is turned on.
(Replacing the battery at an early stage is recommended.)
1. Turn and slide the unit cover until the entire shape of the
battery is visible.
2. Insert the battery, and slide and turn the unit cover to close it.
Close the unit cover until it clicks.
NOTE
• Use the specifi ed battery (AAA manganese battery or AAA
alkaline battery).
• Do not reverse the polarity (positive
the battery when inserting.
• Dispose of the used battery as an incombustible waste or
according to the regulations in your area.
• The unit cover can be opened only up to the point where the
battery is placed. Do not forcibly try to open further than that.
8
Unit cover
Unit cover
and negative ) of