Publicidad
Idiomas disponibles
Idiomas disponibles
g Operating Instruction
Network distributor
Connection instructions:
You need a so-called CAT5e patch cable to
connect work stations and other network devices.
Crossover or "one to one" (uncrossed) standard
network cable can be used.
This also applies for connecting other
switches/hubs.
The cable type is identified automatically at
all ports.
You can check that the connection to the device is
correct at the front via the LEDs "Link/ACT".
The corresponding "100M" LED also lights when
1000Mbps mode is used.
Safety instructions:
• The unit is only suitable for indoor use
• The unit may not be operated in the vicinity of
heaters or in dusty areas.
• Use the enclosed power supply unit only.
Using other power supply units could damage
the device.
4
Support and Contact Information
If products are defective:
Please contact your dealer or Hama Product
Consulting if you have any product claims.
Internet / World Wide Web:
Product support, new drivers or product
information can be found at www.hama.com
Support Hotline – Hama Product Consulting:
Tel. +49 (0) 9091 / 502-115
Fax +49 (0) 9091 / 502-272
E-mail: produktberatung@hama.de
Publicidad
