Technical Data; General Safety Instructions - Gude GH 150 Traducción Del Manual De Instrucciones

ENGLISH
6

Technical Data

HAND-OPERATED AUGER
Item No.
Drill Diameter
Length of Drill
LxBxH
Weight
Use as designated
The hand-operated auger is ideal to settle the fence post, plant trees. Bushes etc.
This appliance must not be used for any works other than for which the appliance has been designed and that
are specified in the Operating Instructions. Any other use will be considered a use in conflict with the designa-
tion. The manufacturer will not be liable for any consequential damage or injuries. Please be sure to know that
the appliance has not been designed for industrial purposes.

General Safety Instructions

Read the instructions for use thoroughly before the initial operation of the machine.
Observe the instructions shown below carefully to guarantee the high degree of safety.
Caution!
• The working site must be clean and tidy. Messy workplace increases the risk of accidents and injuries.
• Do not let any unauthorised persons approach the machine. The visitors and viewers, primarily the child-
ren, the ill and infirm persons should not have any access to the working area and kept at a safe distance.
• Pay attention to adequate clothing. Do not wear loose-fitting clothes and jewels. They can be caught by
moving parts of the machine. When working, use work gloves and non-skid work shoes. Long hair should
be protected appropriately.
• Use personal protection equipment. Wear goggles and gloves.
• Be particular about your balance and sure footing. Never lean forward or sideward too much when trying
to reach something.
• Be attentive any time. Mind what you are doing. Use common sense. Do not use the unit when feeling
tired,
• Watch out for any damaged parts. Inspect the machine before use.
• Use approved parts only. Use only identical spare parts for maintenance and repairs. Request advice of an
authorised servicing centre for this purpose.
• Warning! Use of accessories and extensions other than expressly recommended in this operating manual
may result in threat to persons and property.
Warranty
A warranty period of 12 months applies to commercial use and 24 months apply to private use and commences
on the day of purchase of the device.
Warranty applies exclusively to failures due to defective material or workmanship. An original sale slip with
indication of date of sale must be presented in case of claiming for the warranty rights.
Warranty does not cover unprofessional use such as device overload, violent use, damage caused by third party
or foreign materials, failure to comply with operations and assembly manual, and normal wear and tear.
GH 150
94136
150 mm
1030 mm
1040x710x150mm
3 kg