5. Install the Displays
Tighten
Attach both displays to the Horizontal Support Assembly simultaneously using the Knobs and washers. Tighten
both Knobs to secure the displays. Make sure the displays are safely secured before releasing. Repeat step for
the second set of displays to the top Horizontal Support Assembly.
6. Cable Management
15-05-260-933460.indb 9
WARNING: Always ensure all four monitors
face forward. Turning the monitors to face
backward may cause the unit to tip over.
Use the clip for routing the cables.
Note: Leave slack in the cables for arm movement.
9
6/11/2015 4:09:07 PM