Cable Management - Tripp-Lite DDR1026SD El Manual Del Propietario

5. Install the Displays
Tighten
Using an assistant or mechanical lifting equipment, attach both displays to the horizontal support assembly
simultaneously using the knobs and washers. Tighten both knobs to secure the displays. Make sure the displays
are safely secured before releasing the knobs.

6. Cable Management

15-05-256-93345C.indb 8
WARNING: Always ensure both monitors
face forward. Turning the monitors to face
backward may cause the unit to tip over.
Use the clip for routing the cables.
Note: Leave slack in the cables for arm movement.
8
6/11/2015 5:21:25 PM