Tripp-Lite B119-003-UHD Manual Del Propietário página 5

Standard Installation
8 Turn on the power to the HDMI source devices and display. The blue
LEDs on the unit will illuminate to indicate the signal is being received.
9 Switch between source devices using the Select push button on the
unit, RS-232 serial control or the included remote control.
See the RS-232 Serial Control section in this manual for details on
controlling the switch using Terminal Emulation Software.
RS-232 Serial Control
Before using RS-232 Serial Control, you must first go into your Terminal
Emulation Software and update the COM port settings.
1 Go to the Setup dropdown menu, and select the Serial Port Option.
01-071-93376A.indb 5
5
2/7/2018 8:13:13 A