ASROCK Z390 Phantom Gaming X Manual De Instrucciones página 32

Thunderbolt AIC
Connector
(5-pin TB1)
(see p.1, No. 28)
RGB LED Headers
(4-pin RGB_HEADER1)
(see p.1, No. 31)
(4-pin RGB_HEADER2)
(see p.1, No. 8)
Addressable LED Header
(3-pin ADDR_LED1)
(see p.1, No. 32)
28
Please connect a Thunderbolt™
add-in card (AIC) to the
Thunderbolt AIC connector via
the GPIO cable.
*Please install the Thunderbolt™
AIC card to PCIE5 (default
slot).
RGB header is used to connect
1
RGB LED extension cable which
12V G R B
allows users to choose from vari-
ous LED lighting effects.
B
Caution: Never install the RGB
R
LED cable in the wrong orienta-
G
tion; otherwise, the cable may
12V
1
be damaged.
*Please refer to page 49 for
further instructions on this
header.
This header is used to connect
1
Addressable LED extension cable
GND
DO_ADDR
which allows users to choose
VOUT
from various LED lighting
effects.
Caution: Never install the
Addressable LED cable in the
wrong orientation; otherwise,
the cable may be damaged.
*Please refer to page 50 for
further instructions on this
header.