Publicidad
2.5-inch Hard Drive: How to Install the Hard Drive
C
如何安裝硬碟/ So installieren Sie die Festplatte / Comment installer le disque dur / Come installare l'unità HDD / Cómo instalar la unidad de disco duro /
Como Instalar o Disco Rígido / 하드 드라이브를 설치하는 방법 / ハードドライブの取り付け方法
1. Remove the four screws on the bottom case.
2. Attach the HDD cage to the bottom panel
en li up and remove the bottom panel.
and secure it using the four screws.
connect the SATA cable to the HDD.
4.
en reinstall the bottom panel.
*For iBOX-315/316 series, it is not recommended to install 2.5" HDD. If you install the 2.5" HDD, please keep the iBOX-315/316 in a ertical position to
ensure better cooling performance.
SO-DIMM Slots: How to Install the Memory Modules
D
如何安裝記憶體模組 / So installieren Sie die Speichermodule / Comment installer les modules de mémoire / Come installare i moduli di memoria / Cómo instalar los módulos de memoria /
/ Como Instalar os Módulos de Memória / 메모리 모듈/ メモリモジュール
1. Carefully insert the SO-DIMM memory modules
2. Push down until the modules snap into place.
into the slot at a 30-degree angle.
How to Install the VESA Bracket
如何安裝 VESA 支架/ So installieren Sie die VESA-Halterung / Comment installer le support VESA / Come installare il supporto VESA / Cómo instalar el soporte VESA /
VESA / Como Instalar a Braçadeira VESA / VESA 브래킷을 설치하는 방법 / VESA ブラケットの取り付け方法
1. Attach the two screws to the base of the
2. Attach the VESA Bracket to the rear of
iBOX-315/316.
a compatible display using the four screws.
*Choose mounting holes depending on the
mounting hole pattern of your LCD screen
(75 mm × 75 mm or 100 mm × 100 mm).
3. Connect the SATA Data and Power Cable to
the motherboard.
en
(DDR3 Low Voltage (1.35V))
Note:
-
e iBOX-315/316 requires DDR3L SO-DIMM (1.35V).
- For dual channel con guration, you always need to
install identical (the same brand, speed, size and chip-type)
DDR3L SO-DIMM pairs.
3. Mount the iBOX-315/316 by sliding it into place.
Positions of the iBOX-315/316
iBOX-315/316 系列擺放 / Positionen der iBOX-315/316 / Positions de la série iBOX-315/316 / Posizioni della iBOX-315/316 / Posiciones de la iBOX-315/316 /
/
Posições de iBOX-315/316 / iBOX-315/316 시리즈의 위치 / iBOX-315/316 シリーズの位置
e iBOX-315/316 can be placed in vertical or horizontal position.
Horizontal Position
Vertical Position
*Please note that keeping the iBOX-315/316 series in a vertical position will ensure better cooling performance.
USB Power On Function:
USB 電源開啟功能/ USB-Einschaltfunktion / Fonction d'alimentation USB / Funzione di accensione USB / Función de alimentación USB /
Função de Ligamento USB / USB 전원 켜기 기능/ USB 電源オン機能
e terms HDMI™ and HDMI High-De nition Multimedia Interface, and the HDMI logo are trademarks
or registered trademarks of HDMI Licensing LLC in the United States and other countries.
Wall-mounted
USB Power On Function allows system power on via USB keyboard/mouse.
is function is useful when the iBOX-315/316 is mounted behind your
display/TV.
To enable USB Power On Function:
1. Enter BIOS by pressing <F2> or <Del> during device startup.
2. Select "Advanced > ACPI Con guration" from the menu.
3. Set "USB Keyboard Power On" and " USB Mouse Power On" settings to "Enabled".
4. Press F10 to Save and Exit.
iBOX-315/316 /
USB /
Publicidad
