Publicidad
2.5-inch Hard Drive: How to Install the Hard Drive
C
如何安裝硬碟/ So installieren Sie die Festplatte / Comment installer le disque dur / Come installare l'unità HDD / Cómo instalar la unidad de disco duro /
Como Instalar o Disco Rígido / 하드 드라이브를 설치하는 방법 / ハードドライブの取り付け方法
1. Remove the four screws on the bottom case.
2. Attach the HDD cage to the bottom panel
en li up and remove the bottom panel.
and secure it using the four screws.
connect the SATA cable to the HDD.
4.
en reinstall the bottom panel.
*For iBOX-Whiskey Lake/Ryzen series, it is not recommended to install 2.5" HDD. If you install the 2.5" HDD, please keep the iBOX-Whiskey Lake/Ryzen
in a vertical position to ensure better cooling performance.
SO-DIMM Slots: How to Install the Memory Modules
D
如何安裝記憶體模組 / So installieren Sie die Speichermodule / Comment installer les modules de mémoire / Come installare i moduli di memoria / Cómo instalar los módulos de memoria /
/ Como Instalar os Módulos de Memória / 메모리 모듈/ メモリモジュール
1. Carefully insert the SO-DIMM memory modules
2. Push down until the modules snap into place.
into the slot at a 30-degree angle.
Bracket Kits: How to Install the Bracket for a M.2 SSD (Type 2280)
E
如何安裝2280 M.2 SSD的托架 / How to Install the Bracket for a M.2 SSD (Type 2280) / How to Install the Bracket for a M.2 SSD (Type 2280) / How to Install the Bracket for a M.2 SSD (Type 2280) /
How to Install the Bracket for a M.2 SSD (Type 2280) / How to Install the Bracket for a M.2 SSD (Type 2280) / How to Install the Bracket for a M.2 SSD (Type 2280) / How to Install the Bracket
for a M.2 SSD (Type 2280)
1. Use the screw to secure the bracket to the motherboard.
3. Connect the SATA Data and Power Cable to
the motherboard.
en
(DDR4 Low Voltage (1.2V))
Note:
-
e iBOX-Whiskey Lake/Ryzen requires DDR4
SO-DIMM (1.2V).
- For dual channel con guration, you always need to
install identical (the same brand, speed, size and
chip-type) DDR4 SO-DIMM pairs.
2.
en refer to the Section B to install a Type 2280 M.2 SSD.
How to Install the VESA Bracket
如何安裝 VESA 支架/ So installieren Sie die VESA-Halterung / Comment installer le support VESA / Come installare il supporto VESA / Cómo instalar el soporte VESA /
VESA / Como Instalar a Braçadeira VESA / VESA 브래킷을 설치하는 방법 / VESA ブラケットの取り付け方法
/
1. Attach the two screws to the base of the
iBOX-Whiskey Lake/Ryzen.
Positions of the iBOX-Whiskey Lake/Ryzen
iBOX-Whiskey Lake/Ryzen 系列擺放 / Positionen der iBOX-Whiskey Lake/Ryzen / Positions de la série iBOX-Whiskey Lake/Ryzen / Posizioni della iBOX-Whiskey Lake/Ryzen / Posiciones de la
iBOX-Whiskey Lake/Ryzen /
iBOX-Whiskey Lake/Ryzen / Posições de iBOX-Whiskey Lake/Ryzen / iBOX-Whiskey Lake/Ryzen 시리즈의 위치 / iBOX-Whiskey Lake/Ryzen
シリーズの位置
e iBOX-Whiskey Lake/Ryzen can be placed in vertical or horizontal position.
Horizontal Position
Vertical Position
*Please note that keeping the iBOX-Whiskey Lake/Ryzen series in a vertical position will ensure better cooling performance.
e terms HDMI® and HDMI High-De nition Multimedia Interface, and the HDMI logo are trademarks
or registered trademarks of HDMI Licensing LLC in the United States and other countries.
2. Attach the VESA Bracket to the rear of
3. Mount the iBOX-Whiskey Lake/Ryzen by sliding it
a compatible display using the four screws.
into place.
*Choose mounting holes depending on the
mounting hole pattern of your LCD screen
(75 mm × 75 mm or 100 mm × 100 mm).
VESA-mounted
Publicidad
