Tripp-Lite B136-101 El Manual Del Propietario página 11

Extender Kit Installation
Make sure the A/V source is powered OFF.
1
Connect the component video and stereo
2
audio connectors on one of the B136-101 units
to the A/V source; or, connect one of the
B136-101-WP-1 wallplates to the A/V source
using Tripp Lite A008-Series Component Video
and A050-Series Stereo Audio Cables.
Using Cat5e/6 cable, connect the RJ45 port on
3
the local unit to the RJ45 port on the remote unit.
Connect the remote B136-101 unit's component
4
video and stereo audio connectors to the A/V
device; or, connect the remote B136-101-WP-1
wallplate to the A/V device using Tripp Lite A008-
Series Component Video and A050-Series Stereo
Audio Cables.
Turn on the power to the A/V source.
5
11