ASROCK Fatal1ty 990FX Professional Serie Manual De Instrucciones página 44

9. Type the value for Team MTU.
10. Click Create to save the team information.
11. Repeat steps 5. through 10. to de ne additional teams. As teams are de ned,
they can be selected from the team list, but they have not yet been created.
Click the Preview tab to view the team structure before applying the changes.
12. Click Apply/Exit to create all the teams you have de ned and exit the Manage
Teams window.
13. Click Yes when the message is displayed indicating that the network connection
will be temporarily interrupted.
* The team name cannot exceed 39 characters, cannot begin with spaces, and
cannot contain any of the following characters: & \ / : * ? < > |
* Team names must be unique. If you attempt to use a team name more than
once, an error message is displayed indicating that the name already exists.
* The maximum number of team members is 8.
* When team con guration has been correctly performed, a virtual team adapter
driver is created for each con gured team.
* If you disable a virtual team and later want to reenable it, you must rst disable
and reenable all team members before you reenable the virtual team.
* When you create Generic Trunking and Link Aggregation teams, you cannot
designate a standby member. Standby members work only with Smart Load
Balancing and Failover and SLB (Auto-Fallback Disable) types of teams.
* For an SLB (Auto-Fallback Disable) team, to restore traf c to the load
balance members from the standby member, click the Fallback button on the
Team Properties tab.
* When con guring an SLB team, although connecting team members to a hub
is supported for testing, it is recommended to connect team members to a
switch.
* Not all network adapters made by others are supported or fully certi ed for
teaming.
44
Fatal1ty 990FX Professional Series Motherboard