Samsung 5 Serie Manual De Usuario página 15

Picture Options
O
m → Picture → Picture Options →
MEnU
EnTERE
✎
In PC mode, you can only make changes to the Color
Tone, size and Auto Protection Time.
Color Tone
Size
Digital Noise Filter
MPEG Noise Filter
HDMI Black Level
POWER
P
Film Mode
Auto Protection Time
Color Tone (Cool / normal / Warm1 / Warm2)
■
✎
Warm1 or Warm2 will be deactivated when the
picture mode is Dynamic.
✎
Settings can be adjusted and stored for each
external device connected to an input on the TV.
size : Your cable box/satellite receiver
■
MEDIA.P
may have its own set of screen sizes as
well. However, we highly recommend
you use 16:9 mode most of the time.
16:9: Sets the picture to 16:9 wide
mode.
Zoom1: Use for moderate magnification.
Zoom2: Use for a stronger magnification.
Wide Fit: Enlarges the aspect ratio of the picture to fit
the entire screen.
4:3: Sets the picture to basic (4:3) mode.
✎
Do not watch in 4:3 format for a long time. Traces
of borders displayed on the left, right and center
of the screen may cause image retention (screen
burn) which are not covered by the warranty.
screen Fit: Displays the full image without any cut-off
when HDMI (720p / 1080i / 1080p) or Component
(1080i / 1080p) signals are input.
✎
nOTE
x
After selecting
S.MODE
1. Press the ► button to select Position.
2. Press the EnTERE button.
3. Press the ▲ or ▼ button to move the picture up
or down.
4. Press the EnTERE button.
5. Press the ► button to select Reset.
6. Press the EnTERE button to reset the picture
to its default position.
Picture Options
: Normal
: 16:9
: Auto
: Auto
: Normal
: Off
: 2 hours
U Move E Enter R Return
Zoom1, Zoom2 or Wide Fit:
P.MODE
x
After selecting
Component (1080i/1080p) mode, you may need to
center the picture:
1. Press the ◄ or ► button to select Position.
2. Press the EnTERE button.
3. Press the ▲, ▼, ◄ or ► button to move the
picture.
4. Press the EnTERE button.
►
5. Press the ◄ or ► button to select Reset.
6. Press the EnTERE button.
x
HD (High Definition): 16:9 - 1080i/1080p (1920x1080),
720p (1280x720)
x
Settings can be adjusted and stored for each
external device you have connected to an input on
the TV.
Input source
ATV, AV,
Component (480i, 480p)
DTV(1080i),
Component (1080i, 1080p),
HDMI (720p, 1080i, 1080p)
PC
Digital noise
■
P.SIZE
/ Auto Visualization): If the broadcast signal received by
your TV is weak, you can activate the Digital noise Filter
feature to reduce any static and ghosting that may appear
on the screen.
✎
When the signal is weak, try other options until the
best picture is displayed.
Auto Visualization: When changing analog channels,
displays signal strength.
✎
Only available for analog channels.
✎
When bar is green, you are receiving the best
possible signal.
MPEg noise Filter (Off / low / Medium / high /
■
Auto): Reduces MPEG noise to provide an improved
picture quality.
✎
Disabled under
hDMI Black level (normal / low)
■
level on the screen to adjust the screen depth.
✎
Available only in HDMI mode.
SLEEP
screen Fit in HDMI (1080i/1080p) or
Picture size
16:9, Zoom1,
Zoom2, 4:3
16:9, 4:3, Wide Fit,
screen Fit
16:9, 4:3
Filter (Off / low / Medium / high / Auto
PC mode.
: Selects the black
English
15