Bluetooth Operation; Other Operation - Crosley Fleetwood CR3501A Manual De Instrucciones

English
Programmed Playback
1. Press the button on the remote control.
2. Press the PROG button on the remote control or on the unit to enter Memory
mode.
3. Press the number (0-9) buttons or
the unit to select the track that you want to preset, then press PROG button to
confirm.
4. Repeat step 3 to program more tracks.
5. Press the
Note:
- If you want to change the programed files, press the
current program files, display shows "PRG CLR"

Bluetooth Operation

1. Press the
control. "NO BT" will show on the display if the unit is not paired to any
Bluetooth device.
2. Select "CR3501A-WA" in the pairing list. On successful pairing, you will hear
"Paired" from the unit, and the display panel shows "BT".
3. If you cannot find the unit, press and hold the
control or the
"PAIRING" and you will hear "Pairing" from the unit.
Note:

Enter "0000" for the password if necessary

Version 3.0

Other Operation

Select the Equalizer
Press the EQ button on the remote control or on the unit repeatedly to select:
[Pop] - [Classic] - [Jazz] - [Rock] - [Flat]
Adjust the Brightness
Press the Dimmer button on the remote control or the
select brightness level.
Adjust the Bass
Press the Bass button on the remote control enable and disable the bass.
button to playback program tracks.
button on the main unit or press the BT button on the remote
button on the unit to be searchable. The display will show
buttons on the remote control or on
button two times to clear the
10
button on the remote
button on the unit to