Setting The Alarm - Crosley Fleetwood CR3501A Manual De Instrucciones

English

Setting the Alarm

1. In Standby mode, press and hold the Timer/Sleep button on the remote
control until the hour digits flash on the display.
2. Press the
hour digits, and then press the Timer/Sleep button on the remote control to
confirm, the minute digits will flash on the display.
3. Press the
minute digits, and then press the Timer/Sleep button on the remote control to
confirm, the mode will flash on the display.
4. Press the buttons on the remote control or on the unit to select:
- FM (to wake to your selected FM Radio Station)
- BUZZER (to wake to a buzzer sound)
- DISC (to wake to your disc music)
5. Press the Timer/Sleep button on the remote control to confirm, the display will
show the volume level.
6. Press the
volume, and press the Timer/Sleep button on the remote control to confirm.
The display will show the current time and
Activate and Deactivate the Alarm
-
Press the Timer/Sleep button on the remote control to view the alarm settings
or activate the alarm.
-
To deactivate the alarm, press the Timer/Sleep two times. The
disappear from the display on the front of the unit.
-
To activate the alarm, press the Timer/Sleep two times. The
the display on the front of the unit.
Stop Alarm Ring
- When the alarm rings, press the
The alarm stops but the alarm settings remain.
buttons on the remote control or on the unit to adjust the
buttons on the remote control or on the unit to adjust the
buttons on the remote control or on the unit to adjust the
will appear from the display.
button on the remote control or on the unit.
7
will
will show from