Publicidad
2.5-inch Hard Drive: How to Install the Hard Drive
C
如何安裝硬碟/ So installieren Sie die Festplatte / Comment installer le disque dur / Come installare l'unità HDD / Cómo instalar la unidad de disco duro /
Como Instalar o Disco Rígido / 하드 드라이브를 설치하는 방법 / ハードドライブの取り付け方法
1. Remove the four screws on the bottom case.
2. Unscrew the four screws that hold the HDD
en li up and remove the bottom panel.
cage in place.
4. Attach the HDD cage to the bottom
5. Connect the SATA Data and Power
panel and secure it using the four screws.
Cable to the motherboard.
*If you install the 2.5" HDD, please keep the NUC BOX 3160 in a vertical position to ensure better cooling performance.
SO-DIMM Slots: How to Install the Memory Modules
D
如何安裝記憶體模組 / So installieren Sie die Speichermodule / Comment installer les modules de mémoire / Come installare i moduli di memoria / Cómo instalar los módulos de memoria /
/ Como Instalar os Módulos de Memória / 메모리 모듈/ メモリモジュール
1. Carefully insert the SO-DIMM memory modules
2. Push down until the modules snap into place.
into the slot at a 30-degree angle.
How to Install the VESA Bracket
如何安裝 VESA 支架/ So installieren Sie die VESA-Halterung / Comment installer le support VESA / Come installare il supporto VESA / Cómo instalar el soporte VESA /
VESA / Como Instalar a Braçadeira VESA / VESA 브래킷을 설치하는 방법 / VESA ブラケットの取り付け方法
1. Attach the two screws to the base of the
2. Attach the VESA Bracket to the rear of
NUC BOX 3160.
a compatible display using the four screws.
*Choose mounting holes depending on the
mounting hole pattern of your LCD screen
(75 mm × 75 mm or 100 mm × 100 mm).
3. Install the HDD in the cage using the four
screws.
en connect the SATA cable to the
HDD.
6. Align the three latches on the bottom panel with the three latch
holes on the chassis.
en reinstall the bottom panel until it
clicks into place.
(DDR3 Low Voltage (1.35V))
Note:
-
e NUC BOX 3160 requires DDR3L SO-DIMM (1.35V).
- For dual channel con guration, you always need to
install identical (the same brand, speed, size and chip-type)
DDR3L SO-DIMM pairs.
3. Mount the NUC BOX 3160 by sliding it
into place.
Positions of the NUC BOX 3160
NUC BOX 3160 系列擺放/ Positionen der NUC BOX 3160 / Positions de la série NUC BOX 3160/ Posizioni della NUC BOX 3160 / Posiciones de la
/
NUC BOX 3160 /
NUC BOX 3160 / Posições de NUC BOX 3160 / NUC BOX 3160 시리즈의 위치 / NUC BOX 3160
シリーズの位置
e NUC BOX 3160 can be placed in vertical or horizontal position.
Horizontal Position
Vertical Position
*Please note that keeping the NUC BOX 3160 series in a vertical position will ensure better cooling performance.
USB Power On Function:
USB 電源開啟功能/ USB-Einschaltfunktion / Fonction d'alimentation USB / Funzione di accensione USB / Función de alimentación USB /
Função de Ligamento USB / USB 전원 켜기 기능/ USB 電源オン機能
e terms HDMI® and HDMI High-De nition Multimedia Interface, and the HDMI logo are trademarks
or registered trademarks of HDMI Licensing LLC in the United States and other countries.
Wall-mounted
USB Power On Function allows system power on via USB keyboard/mouse.
is function is useful when the NUC BOX 3160 is mounted behind your
display/TV.
To enable USB Power On Function:
1. Enter BIOS by pressing <F2> or <Del> during device startup.
2. Select "Advanced > ACPI Con guration" from the menu.
3. Set "USB Keyboard Power On" and " USB Mouse Power On" settings to "Enabled".
4. Press F10 to Save and Exit.
USB /
Publicidad
