Publicidad

Idiomas disponibles

Idiomas disponibles

Enlaces rápidos

P
4
S
D
Q
P
4
S
D
Q
P
4
S
D
Q
FCC Statement and Copyright
This equipment has been tested and found to comply with the limits of a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful interference
in a residential installation. This equipment generates, uses and can
radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. There is no guarantee that interference will not occur in a
particular installation.
The vendor makes no representations or warranties with respect to the
contents here of and specially disclaims any implied warranties of
merchantability or fitness for any purpose. Further the vendor reserves the
right to revise this publication and to make changes to the contents here of
without obligation to notify any party beforehand.
Duplication of this publication, in part or in whole is not allowed without
first obtaining the vendor's approval in writing.
The content of this user's is subject to be changed without notice and we
will not be responsible for any mistakes found in this user's manual. All the
brand and product names are trademarks of their respective companies.
i

Publicidad

Tabla de contenido

Solución de problemas

loading

Resumen de contenidos para Biostar P4SDQ

  • Página 1 FCC Statement and Copyright This equipment has been tested and found to comply with the limits of a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
  • Página 2: Tabla De Contenido

    ENGLISH..................... 1 P4SDQ Features ........................ 1 Package contents ......................1 Layout of P4SDQ ....................... 2 CPU Installation ......................... 3 DDR DIMM Modules: DDR1-2 ................... 4 Jumpers, Headers, Connectors & Slots ................5 ESPAÑOL ....................10 Características del P4SDQ ..................... 10 Contenido del Paquete....................
  • Página 3: English

    English P4SDQ Features Use SiS 651/ SiS 962L Chipset, ITE 8705, LAN Phy (optional). Contains on board I/O facilities, which include one serial port, a VGA port, a parallel port, a PS/2 mouse port, a PS/2 keyboard port, audio ports, USB ports, a LAN port (optional) and a game port.
  • Página 4: Layout Of P4Sdq

    Layout of P4SDQ JKBMS1 JCFAN1 JUSBV2 & Mouse JATXPWR2 Socket 478 USB & LAN JUSBLAN1 JCOM1 JATXPWR1 JPRNT1 IDE2 IDE1 JCOM2 JVGA1 JAUD GAME1 SIS 651 JSFAN1 AGP1 JDIMMPWR1 PCI1 BAT1 JAUDIO1 JUSB2 JUSB1 JCMOS1 CODEC PCI2 962L JUSBV1 JPANEL1...
  • Página 5: Cpu Installation

    CPU Installation Pull the lever sideways away from the socket then raise the lever up to 90-degree angle. Locate Pin A in the socket and lock for the white dot or cut edge in the CPU. Match Pin A with the white dot/cut edge then insert the CPU.
  • Página 6: Ddr Dimm Modules: Ddr1-2

    DDR DIMM Modules: DDR1-2 DRAM Access Time: 2.5V Unbuffered DDR 200/266/333 MHz Type required. DRAM Type: 64MB/ 128MB/ 256MB/ 512MB/ 1GB DIMM Module (184 pin) DIMM Socket DDR Module Total Memory Location Size (MB) DDR 1 64MB/128MB/256MB/512MB/1GB Max is DDR 2 64MB/128MB/256MB/512MB/1GB * The list shown above for DRAM configuration is only for reference.
  • Página 7: Jumpers, Headers, Connectors & Slots

    Jumpers, Headers, Connectors & Slots Hard Disk Connectors: IDE1/ IDE2 The motherboard has a 32-bit Enhanced PCI IDE Controller that provides PIO Mode 0~4, Bus Master, and Ultra DMA / 33/ 66/ 100 / 133 functionality. It has two HDD connectors IDE1 (primary) and IDE2 (secondary).
  • Página 8 Power Connectors: JATXPWR1/ JATXPWR2 JATXPWR2 (ATX 12V Power Connector) JATXPWR1 (ATX Main Power Connector) Wake On LAN Header: WOL1 Ground Wake up 5V_SB WOL1 Front USB Header: JUSB1/ JUSB2 Pin1,2 ==> +5V Pin3,4 ==> Data(-) Pin5,6 ==> Data(+) Pin7,8 ==> Ground Pin9 ==>...
  • Página 9 5V/ 5VSB Selection for USB: JUSBV1/ JUSBV2 Pin 1-2 on ==> 5V Pin 2-3 on ==> 5V_SB JUSBV1-2 DIMM Power Selection Connector: JDIMMPWR1 Jump open ==> 2.5V Pin 1-2 ==> 2.6V Pin 3-4 ==> 2.7V JDIMMPWR1 Pin 5-6 ==> 2.8V Pin 7-8 ==>...
  • Página 10 Audio Subsystem: JAUDIO1/ JCDIN1 JAUDIO1 JAUDIO1 JCDIN1 JCDIN1 (Front Audio Header) (Front Audio Header) (CD-ROM Audio-In Header) (CD-ROM Audio-In Header) Front Panel Audio Connector/ Jumper Block Pin 5 and 6 Audio line out signals are routed ==> to the back panel audio line out connector. Pin 9 and 10 Audio line out and mic in signals are available for front panel audio connectors.
  • Página 11: Back Panel Connectors

    Back Panel Connectors JUSBLAN1 JKBMS1 JPRNT1 LAN(Optional) PS/2 JAUD GAME1 Mouse Parallel Game Port PS/2 Speaker Line In Mic COM1 COM1 VGA1 Keyboard JCOM1 JVGA1 JUSBLAN1 JKBMS1 JPRNT1 LAN(Optional) PS/2 JAUD GAME1 Mouse Parallel Game Port Speaker Line In Mic PS/2 COM1 COM1...
  • Página 12: Español

    Español Características del P4SDQ Usa Chipset SiS 651/ SiS 962L, ITE 8705, LAN Phy (opcional). Contiene facilidades I/O integrados en la placa madre, en el que incluye un puerto en serie, un puerto VGA, un puerto paralelo, un puerto para el ratón PS/2, un puerto para teclado PS/2, puertos de audio, puertos USB, un puerto de LAN (opcional) y un puerto de juego.
  • Página 13: Disposición Del P4Sdq

    Disposición del P4SDQ JKBMS1 Teclado JCFAN1 & JUSBV2 Raton JATXPWR2 Socket 478 USB & LAN JUSBLAN1 JATXPWR1 JCOM1 JPRNT1 IDE2 IDE1 JCOM2 JVGA1 SIS 651 JSFAN1 JGAME1 AGP1 JDIMMPWR1 PCI1 BAT1 JAUDIO1 JUSB2 JUSB1 JCMOS1 CODEC PCI2 962L JUSBV1 JPANEL1...
  • Página 14: Instalación De La Cpu

    Instalación de la CPU Tire de la palanca del lado del zócalo, luego levante la palanca hasta un ángulo de 90 grados. Sitúe el contacto A del zócalo y busque el punto blanco o corte el borde en la CPU. Empareje el contacto A con el punto blanco/ corte del borde, luego inserte la CPU.
  • Página 15: Módulos Ddr Dimm: Ddr1-2

    Módulos DDR DIMM: DDR1-2 DRAM Tiempo de Acceso: 2.5V Unbuffered DDR 200/266/333 MHz Tipo requerido. DRAM Tipo: 64MB/ 128MB/ 256MB/ 512MB/ 1GB Módulo DIMM (184 pin) Localización Módulo DDR Total del del Módulo Tamaño de DIMM Memoria (MB) DDR 1 64MB/128MB/256MB/512MB/1GB Máximo de DDR 2...
  • Página 16: Conectores, Cabezales, Puentes Y Ranuras

    Conectores, Cabezales, Puentes y Ranuras Conectores del Disco Duro: IDE1/ IDE2 La placa madre tiene un controlador de 32-bit PCI IDE que proporciona Modo PIO 0~4, Bus Master, y funcionalidad Ultra DMA / 33/ 66/ 100. Tiene dos conectores HDD IDE1 (primario) y IDE2 (secundario). El conector IDE puede conectar a un master y un drive esclavo, así...
  • Página 17: Conectores De Corriente: Jatxpwr1/ Jatxpwr2

    Conectores de Corriente: JATXPWR1/ JATXPWR2 JATXPWR2 (ATX 12V Conector de Corriente) JATXPWR1 (ATX Conector de Corriente Principal) Cabezal Wake On LAN: WOL1 Tierra Wake up 5V_SB WOL1 Cabezal Frontal USB: JUSB1/ JUSB2 Contacto1,2 ==> +5V Contacto3,4 ==> Dato(-) Contacto5,6 ==> Dato(+) Contacto7,8 ==>...
  • Página 18: Conector De Selección De La Corriente Dimm

    5V/ 5VSB Selección para USB: JUSBV1/ JUSBV2 Contacto 1-2 on ==> 5V Contacto 2-3 on ==> 5V_SB JUSBV1-2 Conector de Selección de la Corriente DIMM: JDIMMPWR1 Puente Abierto ==> 2.5V Contacto 1-2 ==> 2.6V Contacto 3-4 ==> 2.7V JDIMMPWR1 Contacto 5-6 ==> 2.8V Contacto 7-8 ==>...
  • Página 19: Subsistema De Audio: Jaudio1/Jcdin1

    Subsistema de Audio: JAUDIO1/JCDIN1 JAUDIO1 JCDIN1 (Cabezal de Audio Frontal) (Cabezal de Entrada de Audio CD-ROM) Conector del Panel Frontal de Audio/ Jumper Block Pin 5 y 6 La senal de salida de linea del Audio ==> encamina al conector de la salida de linea Pin 9 y 10 del Audio ubicado en el panel trasero.
  • Página 20: Conectores Del Panel Trasero

    Conectores del Panel Trasero JUSBLAN1 JKBMS1 JPRNT1 LAN(Opcional) Raton JAUD GAME1 PS/2 Paralelo Puerto de Juego Salida del Entrada Teclado Entrada COM1 COM1 VGA1 Altavoz de Linea PS/2 del Mic JCOM1 JVGA1 JUSBLAN1 JKBMS1 JPRNT1 LAN(Opcional) Raton JAUD GAME1 PS/2 Paralelo Puerto de Juego Teclado...
  • Página 21: Trouble Shooting

    Trouble Shooting PROBABLE SOLUTION No power to the system at all Power light don’t * Make sure power cable is securely plugged in illuminate, fan inside power supply does not turn * Replace cable on. Indicator light on keyboard does not turn on * Contact technical support PROBABLE SOLUTION...
  • Página 22: Solución De Problemas

    Solución de Problemas CAUSA PROBABLE SOLUCIÓN No hay corriente en el sistema. La luz de * Asegúrese que el cable de transmisión esté corriente no ilumina, ventilador dentro de la seguramente enchufado. fuente de alimentación apagada. Indicador de * Reemplace el cable. luz del teclado apagado.
  • Página 23 09/10/2002...

Tabla de contenido