Intended Use; Initial Use; Scope Of Delivery; Technical Data - Würth IEG-1000 SOLID Traducción Del Manual De Instrucciones De Servicio Original

General safety instructions
Attention!
A magnetic field is generated. This can
delete magnetic data carriers on bank
cards, etc.
Always visually check the device for damage
■
before initial use and after transport. Have any
damage repaired by trained service personnel
prior to initial use.
Use only original Würth accessories
■
and spare parts.

Scope of Delivery

• Induction heater device
• Generator with mains cable
• Four different induction coils
• Operating instructions
• Carrying case

Technical Data

Item
Mains voltage
Power
Frequency
Protection class
Weight
Hand-held device
Generator
Dimensions
Hand-held device
Generator
12
0720 999 17X
230 V AC
1000 W
50 - 60 Hz
I
2.1 kg
3.1 kg
420 x 100 x 100 mm
350 x 250 x 150 mm

Intended Use

The device is designed to heat magnetisable metals
using induction technology.
The appliance is designed for use with genuine
Würth system accessories.
Any other use is considered an improper use.
The user is solely responsible for damage
resulting from improper use.

Initial Use

WARNING !
Risk of severe injuries.
¾ Use the device only with the
generator and original mains
cable.
¾ Inspect the device for damage.
WARNING !
Risk of injuries or material damage
due to improper accessories.
¾ Use the device only with
the appropriate induction
coil recommended by the
manufacturer.
Operation (Fig. I)
Risk of burns
 The device heats up metal objects
very quickly.
¾ Do not wear any metal objects
(e.g. jewellery).
Danger from toxic substances
 Vapours and fumes from over-
heated stickers are toxic.
¾ Wear a face mask with double
filter. Paper masks are not suitable.
CAUTION!
CAUTION!