Environmental Instructions; Declaration Of Conformity - Würth IEG-1000 SOLID Traducción Del Manual De Instrucciones De Servicio Original

Maintenance / Care
WARNING !
Injuries or material damage due to
improper actions.
¾ Do not open the device.
Clean the device, power cable, plug and switch
■
with a dry, non-abrasive cloth.
Remove soiling that is difficult to remove using a
■
non-volatile cleansing agent for vehicle interiors.
Allow all parts to dry thoroughly.
■
Do not use an induction coil whose insulating
■
sheath is damaged or worn.
The device requires little maintenance.
■
Inspect the mains cable and plug for damage at
■
regular intervals.

Environmental Instructions

Do not throw the device away with
normal household waste. Dispose of
the device via an approved waste
disposal company or via your local
authority waste disposal facility.
Observe the currently valid regula-
tions. In case of doubt, contact your
waste disposal facility. Dispose of all packaging in
an environmentally sound manner.
Warranty
We provide a warranty for this Würth device from
the date of purchase and in accordance with the
legal/country-specific regulations (proof of purchase
through invoice or delivery note).
Any damage arising is remedied by the supply
of spare parts or by repair. Damage caused by
improper handling is not covered by the warranty.
Claims under warranty can only be accepted if
the device is returned fully assembled to a Würth
agency, your Würth sales representative or an
authorised Würth customer service workshop. We
reserve the right to make technical changes.
We accept no liability for printing errors.
Spare parts
If in spite of careful manufacturing and testing
processes, the device becomes faulty, a repair by
Würth masterService should be arranged. Always
quote the article number as given on the name
plate, with any enquiries or spare parts orders.

Declaration of Conformity

We herewith declare that this product conforms to
the following standards and directives:
Standards
• EN 55011
• EN 61000-6-2
• EN 61010-1
in accordance with the regulations stipulated in the
directives:
EC Directive
• 2006/42/EC
• 2004/108/EC
• 2006/95/EC
• 2011/65/EU RoHS II
Technical documentation at:
Adolf Würth GmbH & Co. KG, Abt. PFW
Gerd Rössler
Managing Director
Würth International AG
Chur,: 11.02.2014
Patrick Kohler
Department Manager
Category Management
15