Chauvet DJ EZPin Pack Guía De Referencia Rápida página 4

EZpin™ Pack QRG
AC Power
Charging the
Battery
Battery Run
Time
IRC-6
(Infrared
Remote
Control)
The EZpin™ IRC has an external auto-ranging power supply that can work
with an input voltage range of 100 to 240 VAC, 50/60 Hz. Output voltage is
9 VDC, 500 mA (6 outputs).
The EZpin™ IRC comes with a rechargeable lithium battery for cable-free
operation. To charge the battery, simply plug in the multi-charger at any time
before or after operation. To charge the battery before or after operation with the
LED off, leave the power switch in the Off position. The indicator light on the
external power supply turns red while the battery is charging, then it turns green
when the battery is done charging.
· For optimal battery life, charge the EZpin™ IRC battery 24 hours prior
to initial use.
· When using the multi-charger, charge the EZpin™ IRC while the unit is
powered Off.
· The LED indicator light will flash red if you overcharge your units.
Maximum Run Time
Up to 6 hours
The EZpin™ IRC is compatible with the IRC-6 from CHAUVET®. For
more information on the IRC-6 or to download instructions, go to
http://www.chauvetlighting.com/product-manuals-literature.
4
EN
Recharge Time
6.5 hours