Axis Q16 Serie Guia De Instalacion página 22

AXIS Q16 Network Camera Series
3. Set the camera to its extreme distant-focus position by loosening the focus puller and
turning the focus ring fully clockwise.
4. Press and quickly release the function button. When the status indicator flashes, the
Focus Assistant is enabled.
5. Gently turn the focus ring anti-clockwise until it stops.
6. Turn the focus ring slowly clockwise until the status indicator flashes green.
7. To exit the Focus Assistant, press the function button. If you cannot access the function
button, the Focus Assistant is switched off automatically after 15 minutes.
8. Re-tighten the focus puller.
9. Go to the Image tab in the product's webpage.
10. Click Autofocus and follow the instructions from the wizard.
22