Publicidad
Legal considerations
Video and audio surveillance can be regulated by
laws that vary from country to country. Check the
laws in your local region before using this product
for surveillance purposes.
Liability
Every care has been taken in the preparation of this
document. Please inform your local Axis office of
any inaccuracies or omissions. Axis Communications
AB cannot be held responsible for any technical or
typographical errors and reserves the right to make
changes to the product and manuals without prior
notice. Axis Communications AB makes no warranty
of any kind with regard to the material contained
within this document, including, but not limited to,
the implied warranties of merchantability and fitness
for a particular purpose. Axis Communications AB
shall not be liable nor responsible for incidental
or consequential damages in connection with the
furnishing, performance or use of this material. This
product is only to be used for its intended purpose.
Intellectual property rights
Axis AB has intellectual property rights relating to
technology embodied in the product described in
this document. In particular, and without limitation,
these intellectual property rights may include one or
more of the patents listed at axis.com/patent and
one or more additional patents or pending patent
applications in the US and other countries.
Equipment modifications
This equipment must be installed and used in
strict accordance with the instructions given in
the user documentation. This equipment contains
no user-serviceable components. Unauthorized
equipment changes or modifications will invalidate
all applicable regulatory certifications and approvals.
Trademark acknowledgements
AXIS COMMUNICATIONS, AXIS and VAPIX are
registered trademarks or trademark applications of
Axis AB in various jurisdictions. All other company
names and products are trademarks or registered
trademarks of their respective companies.
Regulatory information
Europe
This product complies with the applicable CE marking
directives and harmonized standards:
•
Electromagnetic Compatibility (EMC) Directive
2014/30/EU. See Electromagnetic compatibility
(EMC) on page 2 .
•
Low Voltage Directive (LVD) 2014/35/EU. See
Safety on page 3 .
•
Restriction of Hazardous Substances
(RoHS) Directive 2011/65/EU, including any
amendments, updates or replacements. See
Disposal and recycling on page 3 .
A copy of the original declaration of conformity
may be obtained from Axis Communications AB. See
Contact information on page 4 .
Electromagnetic compatibility (EMC)
This equipment has been designed and tested to fulfill
applicable standards for:
•
Radio frequency emission when installed
according to the instructions and used in its
intended environment.
•
Immunity to electrical and electromagnetic
phenomena when installed according to
the instructions and used in its intended
environment.
USA
This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions:
1.
This device may not cause harmful interference,
and
2.
this device must accept any interference
received, including interference that may cause
undesired operation.
Using an unshielded network cable (UTP) – This
equipment has been tested using an unshielded
network cable (UTP) and found to comply with the
limits for a Class A digital device, pursuant to part 15
of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference
when the equipment is operated in a commercial
environment. This equipment generates, uses, and
can radiate radio frequency energy and, if not
installed and used in accordance with the instruction
manual, may cause harmful interference to radio
communications. Operation of this equipment in a
residential area is likely to cause harmful interference
in which case the user will be required to correct the
interference at his own expense.
Using a shielded network cable (STP) – This
equipment has also been tested using a shielded
network cable (STP) and found to comply with the
limits for a Class B digital device, pursuant to part 15
of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in
a residential installation. This equipment generates,
uses and can radiate radio frequency energy and,
if not installed and used in accordance with the
instructions, may cause harmful interference to radio
communications. However, there is no guarantee that
interference will not occur in a particular installation.
If this equipment does cause harmful interference
to radio or television reception, which can be
determined by turning the equipment off and on, the
user is encouraged to try to correct the interference
by one or more of the following measures:
•
Reorient or relocate the receiving antenna.
•
Increase the separation between the equipment
and receiver.
Publicidad
