Safety Precautions - OTC 1595A Lista De Piezas E Instrucciones De Operación

Parts List & Operating Instructions
Functional Check of Lift
Without external load applied to the Lift platform, fully raise and lower multiple times to ensure proper function
of the hydraulic system and scissor components.
1. Press the end of the air pump foot pedal marked
extension.
2. Press and hold the end of the air pump foot pedal marked
a fully collapsed position.
3. Ensure platform raises and lowers only when the air pump foot pedal is actively depressed by the operator.
WARNING: To prevent personal injury and/or equipment damage, if platform moves after air
pump pedal is released, discontinue use and service immediately.
WARNING: To prevent personal injury or equipment damage,
• Study, understand, and follow all instructions before operating this device.
• Wear eye protection that meets OSHA and ANSI Z87.1 standards.
• No alterations shall be made to this product
• Before using the Power Train Lift, inspect the unit for leaks, or damaged, loose, or
missing parts. Immediately replace cut, frayed, damaged hoses.
• Only use attachments and/or adapters supplied by the manufacturer.
• Adequately support the vehicle before starting repairs.
• Securely tighten the strap assembly around the component being lifted.
• Do not exceed the rated capacity.
• Do not lift or move a load that has a center of gravity extending beyond the wheels.
Tipping can result in personal injury.
• Do not move the Power Train Lift while the load is raised. Always lower the load
completely before moving or storing the load.
• Carefully and slowly move a load on an incline or around a corner. Tipping can result
in personal injury.
• Use only on a hard, level surface.
• Do not stand under a load that is supported by the Power Train Lift.
• The component must be securely held in place before it is removed from the Power
Train Lift.
Form No. SP04506662, Sheet 3 of 4, Back
to raise the Lift platform until it stops at maximum

Safety Precautions

to lower the Lift platform until it reaches