Security Instructions - Bahco 250400000 Guia De Inicio Rapido

BOARD LIFTER
ENGLISH
READ CAREFULLY THE FOLLOWING
INSTRUCTIONS BEFORE USING THIS
EQUIPMENT FOR THE FIRST TIME

SECURITY INSTRUCTIONS

Use advices
Periodically check that the cable is in good condition.
■
Change it if any external damage (deformation, fold...) or
wire breakage.
Replace the winch when worn or malfunctioning.
■
Periodically check tightness of nuts.
■
Check that all components are fitted correctly.
■
No modification should be made without the manufacturer
■
approval.
Wheels should be securely fastened to the tube.
■
When the plaster board is at the proper height, release the
■
winch handle to avoid its and wire's premature wear.
Release the brakes to allow the descent.
■
Do not block the brake when the wire isn't tense.
■
Do not use the tool holder base as a ladder or working
■
platform. If necessary, use an additional ladder to fix or
screw the plaster board.
Avoid moving your lifter with a load on it.
■
Do not obstruct the work area to facilitate the lifter
■
displacement.
Use the lifter on a stable base, which will withstand the
■
weight of a loaded device.
Do not allow children handle lifter.
■
The users must ensure their own safety and local laws.
■
Always check the good functioning before use.
■
Do not remove the security devices.
■
Use of helmet: obey local laws.
■
Check the condition of the return springs and wire is good:
■
replace when worn.
Check that the equipment has the Certificate of Conformity
■
Only use the equipment if it is in perfect operating
■
condition
2
ASSEMBLY
GUIDELINES
1
Open the 4 legs
2
Index the legs
3
Lock the two wheels
fitted with brakes
(winch side).
4
Fit the antenna to the
top of the telescopic
mast using the pin
(blocking handle at the
same side of the
winch´s handle).
Blocking handle
Antenna
end
4
Top of the
telescopic
mast
Wheels with brakes
3
Folded antenna
with telescopic
arms
Folded
base
with
integral
telescopic mast,
winch, legs and
wheels
Mounting
system
1
2