Descargar Imprimir esta página

Bosch FMR‑5000‑C Guia De Instalacion página 26

Ocultar thumbs Ver también para FMR‑5000‑C:

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 28
26
en | Safety Instructions
1
Safety Instructions
Warning!
Live components and stripped cable! Risk of injury from electric shock. The system must be
!
current-free during connection work.
Notice!
Installation must only be performed by authorized and specialized personnel!
Bosch Sicherheitssysteme GmbH, Robert-Bosch-Ring 5, 85630 Grasbrunn, Germany retains
the complete copyright to the whole documentation. Without the express written permission
of Bosch, no part of these documents may be duplicated or transmitted in any form.
Bosch reserves the right to make changes to this manual without prior notice.
2
Functional Description
The Remote Keypad can be used to perform the same operating procedures as the control
panel, enabling variable operation of a networked system. It has the following functional
elements (see 1, page 4 ):
Pos.
Designation
A
Touch screen
B
22 fixed buttons
C
12 LEDs
D
Key switch
E
Reboot button
F
6-pin DIP switch
G
3 rotary switches
3
Installation
Follow the mounting instructions according to the mouting variant for your application.
4
Mounting variants
Surface wall mounting
Flush wall mounting
Tilted installation
4
Wiring
1.
2.
The Remote Keypad has
2020.07 | 5 | F.01U.258.926
Function
Operating the networked system through virtual buttons and variable display windows
Standard entries
Indicating the operating status
2 switch settings, freely programmable, e.g. for switching between day/night mode or
connecting/disconnecting for local alarm signaling
Remote Keypad HW reset
Configuration
Address setting
Before mounting the housing, remove the operating unit. This prevents the touch screen
being damaged and facilitates installing the lower mounting screws.
Illustration
See 2, page 5 , I
See 2, page 5 , II
See 2, page 5 , III
Connect the shield wires to the screw terminal ( 11, page 13 , step 1).
Fasten the cables with cable ties ( 11, page 13 , step 1 to 4).
Mounting Instructions
See 3, page 6 to 5, page 8 (step 1 to 13) and 6, page 9
See 3, page 6 to 5, page 8 (step 1 to 13) and 7, page 10
See 3, page 6 to 5, page 8 (step 1 to 13) and 8, page 11
Installation Guide
Remote keypad
Bosch Sicherheitssysteme GmbH

Publicidad

loading