GB
PARTS & FUNCTIONS
See illustration I
1.
Battery compartment cover
Open the battery compartment and place the battery (see illustration III).
2.
USB charging socket (Charging the battery)
The Blue Easy offers 2 charging options:
1.
USB cable (13)
2.
Cigarette lighter (12)
Make sure that the Blue Easy is fully charged before using the device.
3.
On/Off button (Turning on / Turning off / Pairing / Switching calls from Blue Easy to mobile
phone)
-
Turning on: Press and hold the On/Off button (3) until you hear a melody and the blue LED indicator (5) starts
flashing.
-
Turning off: Press and hold the On/Off button (3) until you hear a melody and the red LED indicator (5) lights
up briefly before turning off again.
Attention!
The Blue Easy will also turn off automatically if there has been no Bluetooth
Blue Easy and another mobile device for more than 10 minutes.
-
Pairing:
First use pairing: When the Blue Easy is turned on for the first time, it will automatically enter
pairing mode and search for available Bluetooth
blue and red colors alternately). → Let your phone search for Bluetooth
connection with the Blue Easy in the menu of your mobile phone and enter the PIN code 0000* to
pair both devices. You will hear a long beep. → The blue LED indicator (5) will start flashing again.
*PIN code is usually not required for Bluetooth
Normal pairing: Make sure that the Blue Easy is turned off. → Press and hold the On/Off button (3)
until the LED indicator (5) starts flashing by blue and red colors alternately. → Let your phone search
for Bluetooth
devices. → Select the Blue Easy in your mobile phone and enter the PIN code 0000* to
®
pair both devices. You will hear a long beep. → The blue LED indicator (5) will start flashing again.
*PIN code is usually not required for Bluetooth
Attention!
•
To ensure automatic reconnection between the phone and the Blue Easy, we recommend setting the Blue
Easy as "Authorized" in the Bluetooth
phone for more detailed information.
•
If the Bluetooth
connection is not restored automatically after disconnection, press the central button (4)
®
for 3 seconds to restore the connection manually.
-
Switching calls from Blue Easy to mobile phone: During a conversation, press the On/Off button (3) once
to continue the conversation through your mobile phone.
To continue the conversation through the Blue Easy, press the On/Off button (3).
4.
Central button
-
Incoming call: Press 1x to answer a call.
-
Incoming call: Press and hold (2 sec.) to reject a call.
-
During a conversation: Press 1x to end a call.
-
Standby mode: Press 1x to restore the Bluetooth
-
Standby mode: Press 1x to activate voice dialing.
Attention!
The voice dialing function is only available if it is supported by your mobile phone!
-
Standby mode: Press quickly 2x to redial the last dialed number.
connection between the
®
devices (the LED indicator (5) starts flashing by
®
®
devices. → Confirm the
2.1 mobile phones
®
2.1 mobile phones
®
®
menu of your phone! Please refer to the manual of your mobile
connection after it has been broken.
®
-
During a conversation: Press 2x when you hear a beep (2
on hold.
-
During a conversation: Press briefly 2x to switch between 2 calls.
-
During 2nd call: Press 1x to end 1 of the 2 calls.
Attention!
Some phones do not support this Bluetooth
menu!
5.
LED indicator
-
Red indicator:
•
Flashes in Standby mode: low battery capacity.
•
Lights continuously while charging the battery.
•
Lights continuously in mute mode.
-
Blue indicator:
•
Flashes in Standby mode.
-
Red & Blue indicators:
•
Flash alternately in pairing mode.
6.
Microphone
Make sure that the microphone is directed towards your mouth. For optimum performance, the microphone
should be located at a distance of 30-50 cm from the drivers' mouth. Make sure that there are no obstacles
in front of the microphone of the Blue Easy.
7.
Speaker
8.
(+) and (-) Volume buttons
-
Press (+) to increase the volume level.
-
Press (-) to decrease the volume level.
9.
MODE-button (Activate privacy & mute mode)
-
Activate privacy mode: Press 1x briefly during a conversation.
Hold the speakerphone against your ear and use the Blue Easy as a normal phone (see illustration V).
-
Deactivate privacy mode: Press 2x briefly.
-
Turn on mute mode: During a conversation, press and hold for 2 sec. to temporarily turn off the microphone
of the Blue Easy. The red LED indicator (5) will light.
-
Turn off mute mode: Press and hold for 2 sec. The blue LED indicator (5) will light and starts flashing.
10.
Magnets for fixation of the sun visor clip (see illustration IV)
ACCESSORIES IN THE BOX
See illustration II
11.
Clip for sun visor fixation
12.
Car charger
13.
USB charging cable
GUARANTEE
Mr Handsfree is a registered trademark of TE-Group NV. The mr Handsfree brand stands for superior product
quality and outstanding customer service. That is why mr Handsfree warrants this product against all defects
in material and workmanship for a period of two (2) years from the date of original purchase of the product.
The conditions of this guarantee and the extent of responsibility of mr Handsfree under this guarantee can be
downloaded from our website: www.mrhandsfree.com.
A more detailed manual and other available languages can be downloaded from
www.mrhandsfree.com
call) to answer a 2
call and put the current call
nd
nd
function or need confirmation through the mobile phone
®