LANDMANN 82431 Instrucciones De Montaje

FIREWOOD HOLDER
Assembly and Use
Instructions for Model:
82431
VER. 2, 12/10/2012
READ FIRST!
RULES FOR SAFE USE
• DO NOT USE OR STORE NEAR SOURCES OF HEAT.
• DO NOT OVERLOAD THE FIREWOOD HOLDER.
DO NOT RETURN PRODUCT TO THE STORE. IF
YOU HAVE QUESTIONS OR HAVE TROUBLE
WITH ASSEMBLY, PLEASE CALL
1-800-321-3473 FOR ASSISTANCE.
PARTS LIST
PART DESCRIPTION
A TOP RAIL
B BOTTOM RAIL
C SELF-TAPPING SCREW
D CANVAS CARRIER
Thank you for your purchase of the Firewood Holder. At
Landmann USA, we strive to provide you with an easy to
use, easy to assemble product. Should you have
questions, issues, a defective part or if you have any
questions concerning its use, please contact us at:
customerservice@landmann-usa.com
-OR-
1-800-321-3473 M-F 8-5 Eastern Time
Proof of purchase may be required.
Landmann® Limited
Distributed by Landmann® USA
Cartersville, GA 30120
www.landmann-usa.com
Made in China
© 2012 Landmann USA
For easiest assembly, follow the assembly steps in this order.
A Phillips screwdriver is needed for assembly.
Assembly time: 5 minutes
Assemble the (2) top rails [ A ] to
STEP
1
the (2) bottom rails [ B ] using (4)
self-tapping screws [ C ].
QUANTITY
2
2
LARGE HANDLE
4
1
Use the small handle to overlap
STEP
2
and attach the canvas carrier [ D ]
to the top rails [ A ]. Use the large
handles for removing the canvas
carrier from the rails and for
carrying.
FIREWOOD HOLDER
ASSEMBLY INSTRUCTIONS
STEP
1
B
A
SMALL HANDLE
STEP
2
A
C
D