Blowing Function - Yamato CINIX Manual De Instrucciones

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

cod. 93740 - CINIX
5) Insert the flexible part of the vacuum tube in place and fix the end piece (pipe union) onto the
other end of the tube
Using the machine
Before vacuuming up ash, always ensure the filter is installed.
Regularly clean the vacuum filter.
The filter bag should be washed by clean and warm water, soap and a scour.
Before use agin the filter be sure it's completely dry. The filter could be
cleaned by shaking or spaying compressed air.
When vacuuming up ash, ensure this does not exceed the temperature of 50°C. The ash vacuum
cleaner is not designed for use at higher temperatures. If used at higher temperatures, the product
warranty shall no longer hold.

Blowing function

When you want to use the blowing function, inser the hose connector into
the blowing mouth as picture shows.
After use
1) Switch off.
2) Remove the flexible power cable from the connection fitting.
3) Remove the flexible tube from the connection fitting.
4) Allow the ash to cool completely.
5) Empty the ash container and clean it with water.
6) Use a cloth dampened with water to clean the container.
7) Clean the filter as described above.
Cleaning and maintenance
Clean all the elements that come into contact with ash regularly and with care, using a cloth
dampened with water.
GUARANTEE
This appliance is guaranteed for a period of 24 months against any manufacturing faults. The
guarantee covers normal operation of the product and does not include faults caused by wear,
incorrect maintenance, tampering with the tool by non specialised persons, improper use, use of
unsuitable accessories, machine overloading, etc. Some components are subject to a normal wear and
are not covered by the warranty. Among these are included the filter and accessories. The guarantee
is in force if the purchase date is proven by an invoice, delivery note or tax receipt as justifying
evidence.
Information on disposal for users of waste electrical & electronic equipment.
This symbol on the products and/or accompanying documents means that used electrical
and electronic products should not be mixed with general household waste. For proper
treatment, recovery and recycling, please take these products to designated collection
points, where they will be accepted on a free of charge basis. Disposing of these
products correctly will help to save valuable resources and prevent any potential
negative effects on human health and the environment which could otherwise arise from
inappropriate waste handling. Please contact your local authority for further details of
your nearest designated collection point.
ENGLISH

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

93740

Tabla de contenido