H-8490, H-8491
PEDESTRIAN DROP OVER
CABLE PROTECTORS
COMPONENTS
36" Lineal Drop Over Protector
NOTE: Drop over protectors do not prevent
abrasion to cable from below.
ASSEMBLY
Interlock with L-connectors to extend protection length.
(See Figure 1)
Figure 1
• Inspect areas for safety hazards.
• Assemble sections by aligning female connectors
over male connectors and press with foot to secure.
• Install cable as required. Place the protector over the
top of exposed cable/hose.
• Test installation for intended use.
• Periodically inspect installation.
PAGE 1 OF 6
1-800-295-5510
uline.com
INSTRUCTIONS
CHANNEL CAPACITY
H-8490
H-8491
Side View
LOAD CAPACITY
The pedestrian drop over cable protectors have different
load supporting capabilities depending on type of
vehicle and temperature. Suitability must be verified by
testing under actual conditions.
Load-supporting capacity varies by type of loading
conditions and environmental conditions. The load
capacity decreases in warm environments. Test before use
and inspect periodically.
MODEL
NO.
H-8490
H-8491
OPERATING TEMPERATURE
-40° to 120°F
CHEMICAL RESISTANCE
Tested for compatibility with common motor oils, gasoline
and diesel fuel. Limited resistance to brake fluids and
other chemicals.
MATERIAL
UV-stabilized polyurethane elastomer.
Para Español, vea páginas 3-4.
Pour le français, consulter les pages 5-6.
CHANNEL CAPACITY – MAX. DIAMETER (W x H)
LOAD CAPACITY PER TIRE
MAX LOAD 70°F
1,050 lbs.
1,050 lbs.
1.5 x 0.5"
4 x 1"
LOAD CAPACITY PER AXLE
MAX LOAD 70°F
2,100 lbs.
2,100 lbs.
0421 IH-8490