Waking up with alarm
20 minutes before the alarm goes off the main light starts from
minimum brightness level.
During this 20 minutes cycle the brightness gradually increases
until it reaches 100% at the alarm set off time.
If the sound is not muted sound starts playing at zero volume
at the alarm time and increases slowly during 2 minutes until it
reaches 100%.
By tapping (4) on the top of product the alarm will be snoozed.
To stop the alarm, press any button.
Setting snooze time
Long press activates the snooze time setting.
Increase and decrease minutes.
Set value. Default snooze value is 7 minutes.
Sleep light timer
Short press activates sleep light timer, each press toggles the
timer between 5, 10, 15, 20, 30, 45 minutes.
Light adjustments
Short press toggles light on/off.
Short press changing the brightness.
Display brightness
Short press adjusting the display brightness in three steps,
10%, 50% and 100% brightness.
Charging
When battery is low the battery symbol will flash. Connect a power
supply to the USB-C connector (3). For charging, use only Ni-MH
type AA rechargeable batteries. Do not use or attempt to charge
other types such as Alkaline, Carbon Zink etc. The wake up lamp
7